Knott Brake Shoe Kit 250×40
Ifor Williams Knott Brake Shoe Kit 250×40
Genuine Knott 250 x 40 brake shoes and springs for one axle, two sets of shoes for Ifor Williams trailers.
250mm Diameter Drum, 50mm Brake Shoe Width, IWT part no. P000330.
Usually any Ifor Williams trailer built after 1999 with a grey hub cab (grease or dust cap) and has its wheels held on by 5 wheel bolts or nuts may be fitted with these brake shoes. If you are in any doubt or you would like to absolutely sure, it may be worth removing a wheel and check the drum size (inside edge should be 250mm) or remove the drum and measure the brake shoes. Please contact us if you need any assistance.
The models of Ifor Williams Trailers usually fitted with 250 x 40 brake shoes (from September 1992) are as follows:
Goods Trailers – GD85, GD105, GD125, GD106 & GD126 (all with 16″ wheels only)
Van Trailers – BV106, BV126 and all Business Inabox models
Car Transporters – CT136HD, CT166G, CT167G & CT177. Transporta CCT5221, Eventa M & L
Flatbed Trailers – LM105HD, LM125HD, LM85HD, LM126, LM106, LM146 & LM166
Plant Trailers – GH1054, GH106, GH126, GX105HD, GX106 & GX126, all GP range.
Horse Boxes – HB510XL & HB610
Livestock Trailers – TA5GHD, TA510G, DP120G
Tiltbed Trailers – all TB range with 12’’ wheels
Tipping Trailer – TT105G, TT3017, TT126G & TT3621
Knott recommend that brakes shoes on the same axle are replaced at the same time to maintain even braking.
2 x Brakes Shoe
2 x Brake shoe with carrier
2 x Shoe retaining spring.
4 x Tension spring