How to replace an Avonride coupling lock

from Western Towing – www.westerntowing.co.uk

Avonride Coupling Head

1) Move the catch in direction of arrow ‘a’ and handle in direction of arrow ‘b’ until roll pin is exposed.

2) Using a suitable drift remove roll pin. Do not drill.

3) The original catch can now be removed. Retain spring for use with the lock. Discard the 2 washers and the plastic blank

Avonride Coupling Head Lock

4) Locate lock into the catch, secure with special nut. Position locking cam by tightening screw position – shown in fig.2. Replace spring into catch under locking cam (see fig.2) and place the assembly in position on coupling body.

5) Line up catch holes and insert the new roll pin.

Check all parts are secure and test locking mechanism operates freely

 

Erde Trailers, trailer spares & accessories
Rhino Roof Bars, pipe tubes & Racks
Witter Towbars
Milenco trailer & Caravan security
Thule cycle carriers, roof boxes & roof bars
Al-ko Axles, couplings, caravan & trailers bakes parts
Westfalia Towbars logo
Towtrust fixed & detachable Towbars
Knott Avonride caravan & Trailer brakes & couplings
Indespension trailers, trailer parts & spares
Indespension trailers, trailer parts & spares
Bulldog trailer & caravan wheelclamps & Coupling locks