To ensure trouble-free use of your trailer we hope you will find the following information useful.
Please let us know if you have any comments, experiences
or any information we could add to this page to help others.
On the drawbar, all DAXARA & ERDE trailers are equipped with a 50mm ball coupling with safety catch, which prevents the trailer becoming detached.
COUPLING AND UNCOUPLING OF TRAILER, lift the handle attaching the coupling to the towball at the same time as compressing the locking trigger on the handle and lift from the towball or place over the towball. It is possible to install an anti theft device that locks the coupling and provides added security. This is a recommended optional extra, please see the accessories available for your model of trailer (For details click your make of trailer - Erde or Daxara.)
The towing vehicle should be fitted with a towing bracket of a recognised standard. Preferably these should comply with the relevant British and international standards (UL standards AU113 and 114 and international standards ISO1103 and 3553). European standard for the towball is 50mm diameter.
For additional security a safety chain is fitted as standard. This should be secured to the towing bracket at all times when towing, so that in the event of the trailer uncoupling the trailer will still be attached to the towing vehicle. (UK Reg. 1995).
All loads should be evenly spread inside the trailer. For your own safety it is important that the trailer is not over loaded, the suspension units and tyres are designed to carry the trailers' maximum gross weight which is marked on the identification plate on the trailer.
It is an offence to load the trailer to more than its marked gross weight
|350x8 wheel||2.5 bar/36 psi|
|400/480x8 wheel||2.5 bar/36 psi|
|400x10 wheel||3.5 bar/50 psi|
|500x10 wheel||3.5 bar/50 psi|
|135x13 wheel||2.5 bar/36 psi|
|145x13 wheel||2.5 bar/36 psi|
If heavily loaded or for long trips, it is necessary to increase tyre pressures by 0.50 bar (7psi).
Option: a spare wheel and fitting kit is available and is highly recommended for safety and convenience. (For details click your make of trailer Erde & Daxara
|M10 x 1.25 Wheel Nuts||70Nm (52ftlb)|
|M14 x 1.5 wheel nuts||120Nm (88ftlb)|
|M8 Chassis Bolts||18Nm (13ftlb)|
|M10 Chassis Bolts||36Nm (26ftlb)|
|M12 chassis bolts||60Nm (44ftlb)|
|Pin No.1||Left indicator||Yellow wire|
|Pin No.2||Fog lamp||Blue or grey wire|
|Pin No.3||Earth||White wires|
|Pin No.4||Right indicator||Green wire|
|Pin No.5||Right tail + No.plate light||Brown wire|
|Pin No.6||Stop lights||Red wires|
|Pin No.7||Left tail + No.plate lights||Black wire|
Rear plug-in light connections
|Pin 1 = Yellow
Pin 2 = Blue or Grey
Pin 3 = Black
Pin 4 = Red
Pin 5 = White
|Pin 1 = Green
Pin 2 = Blue or Grey
Pin 3 = Brown
Pin 4 = Red
Pin 5 = White
Unladen weight: This is the weight of the trailer without payload. This can vary from catalogue weight due to accessory options and should always be checked on a certified weighbridge.
Payload: This is the weight of the load that the trailer is permitted to carry and is the GROSS TRAILER WEIGHT minus the UNLADEN WEIGHT. If there is any doubt, us a weighbridge.
Trainweight: This is the Gross TOWING VEHICLE weight plus the Gross TRAILER WEIGHT
Kerbside Weight: The kerb weight of the towing vehicle is the weight of that vehicle including all fluids with a full tank of fuel and carrying all spares and tools which the vehicle is usually supplied but without driver, passenger or luggage.
Wheeltrack: The horizontal distance between the centre lines of the wheel tyre treads.
Nose Load/Hitch Load Stability: A trailer must always be towed in a stable condition. To achieve this, the trailer must exert a downwards load on the towball of the towing vehicle. This will vary from trailer to trailer and should be obtained from the supplier. It is likely to be 50 to 75 kg. This is measured with a spring balance or scales supporting the full weight of the hitch at the towing point and as the towing height. Care must be taken when loading the trailer not to change the nose load. Maximum allowable nose load is given by the (towing) vehicle manufacturer.
Maximum permissible length: The normal maximum permissible length of a trailer is 7 metres excluding the drawbar and coupling.
Maximum permissible width: 2.55 metres.Note: In the case of length, width and height, these are overall dimensions including linchpins, hinges, etc., it is possible to increase these dimensions in special circumstances