AL-KO Single Axle Braked 1601kg to 1800kg with Water Resistant hubs

AL-KO Single Axle Braked 1601kg to 1800kg with Water Resistant hubs

Part No: 1389 272 98 Model: Plus Axle Type: B1800-9

In line with Al-ko Kober Ltd policy of constant improvement, they reserve the right to change the specifications without notice

Standard dimensions for the axle are as follows:
D =	270mm
E =	70mm
F =	220mm
G =	18mm
C1 =	Minimum 245mm Maximum 340mm
Wheel Inset =	0-33mm
Drum Size =	230mm (2361)
Approx.Weight =	76kg

If you are replacing an existing axle it can be manufactured by the Al-ko Axle Number which can be found on a plate in the centre of the axle (Usually starting with 'LE', "ST" or "AK")

Axle Number:

Without the axle number please enter the following information:

Measurement A =

Measurement C =

Pitch Circle Diameter =

How to calculate the PCD

Gross Weight Required =

Your Details:

Name *

Email address*

Telephone No.*

Postcode *

Comments

* Denotes required information

Important Notes:

All made to measure axles have hot dip galvanised tubes & brackets

Delivery times vary dependent on axle type, usually around 19 working days (4 weeks). This can be confirmed when the drawing is approved. Please note that as this is a bespoke item, made to your specifications, it cannot be cancelled once the order has been placed.

Standard Braked Axles feature a maintenance-free (not water proof) bearings at standard.

After this form is completed please click send and then add the part to your basket and continue though the checkout. As soon as the completed form and order is received by us we will forward the dimensions to Al-ko so a drawing can be produced. Once the drawing is ready We will forward this to you for your confirmation that all the measurements are correct. Once conformation is received the axle will be put into production and a we will let you know a firm delivery date.