- Locate the claw hook
through the deck, either in front of or behind the vehicle wheel.
- The long strap section
should then be fed behind the vehicles tyre and around the top section of
the wheel
-
Ensure that the ‘choker’ section of the strap is positioned horizontally on the outside of the
wheel (See picture)
-
Locate the ratchet on the
opposite side of the wheel to the claw hook and feed the strap ‘loose end’
through the ratchet drum and take up most of the slack.
-
Wind strap onto drum,
allowing at least one full “wrap” on drum before tension is taken up.
-
Tension strap system
ensuring that all elements remain in place.
-
Lock the ratchet handle down.
-
To release tension, pull back
handle about 135 degrees and locate the quick release lever and hold down then
fully open ratchet handle to 180 degrees. Pull on the longer length of strap to
remove from slot
|